PERANCANGAN POROS TRANSMISI DENGAN DAYA 100 HP

Authors

  • Freddy Mananoma
  • Agung Sutrisno
  • Stenly Tangkuman

Abstract

The aim of this work is to design a shaft for transmitting power of 100 hp. There are two gears on the shaft, and two bearings as supports at the shaft.

Based on design result, diameter of critical points on the shaft have been acquired as follows; D1=1,80 in, D2=3,40 in, D3=3,74 in, D4=5,00 in, D5=4,40 in, and D6=3,15 in. Finally, a technical drawing of the designed shaft can be made using Autocad software.

 

Keywords : Diameter, Force, Design, Transmission Shaft,

Downloads

Published

2016-10-25

How to Cite

Mananoma, F., Sutrisno, A., & Tangkuman, S. (2016). PERANCANGAN POROS TRANSMISI DENGAN DAYA 100 HP. Jurnal Poros Teknik Mesin UNSRAT, 6(1). Retrieved from https://ejournal.unsrat.ac.id/v3/index.php/poros/article/view/13793