Analysis of Parameter Changes in Controlling the Quarter-car Active Suspension with PID Controller

Authors

  • Aprildy Randy Andrew Ferdinandus
  • Nindy Gaby Sepang

DOI:

https://doi.org/10.35793/jtek.v10i3.33891

Keywords:

parameter changes, pid controller, quarter-car active suspension

Abstract

Suspension is the part that connects the road surface and the car body, the car suspension is controlled by a control system to minimize car body vibrations caused by the road surface. In the operation of the car, there will be parameter changes that occur, among others, due to changes in the load of the car and tire pressure on the car and of course it affects the plant. The car suspension is controlled using the PID Controller simulated in the Simulink Matlab program and the parameters of the suspension are changed. With the change in suspension parameters, the results of control by the PID Controller can still control the suspension but there are differences in overshoot and settling time at the output

Author Biography

Aprildy Randy Andrew Ferdinandus

Dept. of Engineering

References

K. Ogata, “Transient and Steady-State Response Analyses†in Modern Control Engineering, 5th ed. New Jersey.

Du Haiping, Zhang Nong, “Hinf Control of Active Vehicle Suspensions with Actuator Time Delayâ€, Journal of Sound and Vibration, No.301,pp.236-252, 2007.

M.M.Mm Salem, A. Ayman, “Fuzzy Control of a Quarter-car Suspension Systemâ€, World Academy of Science, Engineering and Technology, No.53, 2009.

G. Priyandoko, M. Mailah, H. Jamaluddin, “Vehicle Active Suspension System Using Skyhook Adaptive Neuro Force Controlâ€, Mechanical Systems and Signal Processing, No.23,pp.855-868, 2009.

A. R. A. Ferdinandus, et al, “Setting Neuro-Fuzzy PID Control in Plant Nonlinear Active Suspensionâ€, IOP Conf.Series: Journal of Physics: Conf.Series 1114 012063, 2018.

S. F. Youness, E. C. Lobusov, “Networked Control for Active Suspension Systemâ€, Procedia Computer Science, 150,pp.123-130, 2019.

J. Dizo, S. Steisunas, M. Blatnicky, “Vibration Analysis of a Coach with the Wheel-flat due to Suspension Parameters Changesâ€, Procedia Engineering, 192,pp.107-112, 2017.

M. Hamed, B. Tesfa, F. Gu, A. D. Ball, “Effects of Tyre Pressure on Vehicle Suspension Performanceâ€, International Letters of Chemistry, Physics and Astronomy, Vol.55,pp.102-111, 2015.

S. Yahaya Md, B. Osman, J. H. Shah, “Modelling and Control of the Active Suspension System Using Proportional Integral Sliding Mode Approachâ€, Asian Journal of Control, Vol.7,No.2,pp.91-98, 2005.

P. Chen, A. Huang, “Adaptive Sliding Control of Non-autonomous Active Suspension Systems with Time-varying Loadingsâ€, Journal of Sound and Vibration, No.282,pp.1119-1135, 2005.

Downloads

Published

2021-12-29