Pengaruh Perendaman Resin Komposit Nanofil dalam Obat Kumur Probiotik Non-Alkohol terhadap Kekerasan Permukaan
DOI:
https://doi.org/10.35790/eg.v14i1.61690Abstract
Abstract: Recently, composite resin has become the most desired restorative materials. Due to its small filler particle, nanofilled resin composite deliver a superb result in esthetical aspect. However, composite’s mechanical properties could be affected by various factors, for example by using mouthwash. Mouthwash with probiotics has been popular these day, which results in positive effect on oral hygiene, such as lower plaque index. However, the effect of probiotic mouthwash to mechanical properties of nanofilled resin composite is yet to be researched. This study aimed to evaluate the effect of nanofilled resin composite immersion in non-alcohol probiotic mouthwash on surface hardness. Samples were nanofilled resin composite Filtek Z350 XT mould into silindrical shape and cured. The samples were immersed in fabricated saliva and their surface hardness were measured with Vickers hardness test (pre-test). There were four sample groups: 12-hour and 24-hour saliva immersed group, and 12-hour and 24 hour non-alcohol probiotic mouthwash immersed group. After the immersion of each group, surface hardness of each sample was tested with Vickers hardness test (post-test). This results showed that there was significantly reduction of hardness between pre-test and post-test samples in each group, and real reduction of hardness between samples immersed in saliva and non-alcohol probiotic mouthwash. There was no significant difference between samples immersed in non-alcohol probiotic mouthwash for 12 hours and 24 hours. In conclusion, there is a significant difference in nanofilled resin composite hardness between before and after immersion in non-alcohol probiotic mouthwash.
Keywords: nanofilled-resin composite; surface hardness; probiotic mouthwash
Abstrak: Resin komposit merupakan bahan restorasi yang sangat digemari saat ini. Ukuran partikel filler resin komposit nanofil memberikan hasil yang sangat memuaskan dalam segi estetika, namun terkadang sifat mekanik resin komposit dapat dipengaruhi oleh berbagai hal, salah satunya yaitu penggunaan obat kumur. Saat ini, telah beredar obat kumur yang mengandung probiotik yang dapat memberikan efek positif, seperti adanya penurunan plak indeks, namun, efek obat kumur probiotik terhadap sifat fisik resin komposit nanofil masih perlu diteliti. Penelitian ini bertujuan untuk mengevaluasi pengaruh perendaman resin komposit nanofil dalam obat kumur probiotik non-alkohol terhadap kekerasan permukaan. Sampel penelitian ialah resin komposit nanofil Filtek Z350 XT yang dibentuk menjadi silinder dan disinar. Sampel direndam dalam saliva buatan sebagai pre-test, kemudian kekerasan permukaan diukur dengan Vickers hardness test (pretest). Setelah itu sampel dibagi menjadi empat kelompok perlakuan, yaitu: kelompok saliva 12 dan 24 jam, dan kelompok obat kumur probiotik 12 jam dan 24 jam. Sampel direndam sesuai dengan waktu yang ditentukan pada tiap kelompok, kemudian dilakukan Vickers hardness test kembali (post-test). Hasil penelitian mendapatkan bahwa terjadi penurunan nilai kekerasan yang bermakna antara sampel pre-test dengan sampel post-test pada setiap kelompok. Tidak terdapat perbedaan bermakna antara perendaman 12 jam dan 24 jam dalam obat kumur probiotik non-alkohol. Simpulan penelitian ini ialah terdapat perbedaan bermakna antara kekerasan permukaan resin komposit nanofil sebelum dan sesudah perlakuan dengan obat kumur probiotik non-alkohol.
Kata kunci: resin komposit nanofil; kekerasan permukaan; obat kumur probiotik
References
Alzraikat H, Maghaireh AG, Burrow FM, Taha AN. Nanofilled resin composite properties and clinical performance: a review. Oper Dent. 2018;43(4):E173-90. Doi: 10.2341/17-208-T
Colak G, Katirci G. In vitro evaluation of the effects of whitening toothpastes on the color and surface roughness of different composite resin materials. BMC Oral Health. 2023;23(1). Doi: 10.1186/s12903-023-03277-4
Sunbul H al, Silikas N, Watts DC. Surface and bulk properties of dental resin- composites after solvent storage. Dent Mater. 2016;32(8):987–97. Doi: 10.1016/j.dental.2016.05.007
Alahari S, Challa R, Chaitanya K, Afnan L, Khandelwal A, Tirupathi S. Effect of probiotic mouthwashes in comparison to chlorhexidine on periodontal health. International Journal of Health Sciences. 2022;6(9):2213-28. Doi: 10.53730/ijhs.v6nS9.12905
Ranjith A, Nazimudeen N bin, Baiju KV. Probiotic mouthwash as an adjunct to mechanical therapy in the treatment of stage II periodontitis: A randomized controlled clinical trial. Int J Dent Hyg. 2022;20(2):415–21. Doi: 10.1111/idh.12589
Powers JM, Wataha JC. Dental Materials: Foundations and Applications (11th ed). Chen YW, editor. Missouri: Elsevier; 2017. p. 42–7. Available from: https://books.google.co.id/books?id=rRuKCwAAQBAJ
Pelino JEP, Passero A, Martin AA, Charles CA. In vitro effects of alcohol-containing mouthwashes on human enamel and restorative materials. Braz Oral Res. 2018;32:e25. Doi: 10.1590/1807-3107bor-2018.vol32.0025
Diab M, Zaazou MH, Mubarak EH, Olaa MIF. Effect of five commercial mouthrinses on the microhardness and color stability of two resin composite restorative materials. Australian Journal of Basic and Applied Sciences. 2007;1(4):667–74. Available from: https:// //efaidnbmnnnibpcajpcglclefindmkaj/
George R, Kavyashree G. Effect of four mouth rinses on microhardness of esthetic restorative material. Journal of International Oral Health. 2017;9(2):55–9. Doi: 10.4103/jioh.jioh_21_16
Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22(3):211–22. Doi: 10.1016/j.dental.2005.05.005.
Hamadamin DI, Saeed DH. The impact of energy drinks on surface roughness, hardness, and color stability of three types of composite restorations. Journal of Hunan University Natural Sciences. 2021;48(9):335-48. Available from: https://jonuns.com/index.php/journal/article/view/744/741
Sideridou ID, Karabela MM. Sorption of water, ethanol or ethanol/water solutions by light-cured dental dimethacrylate resins. Dent Mater. 2011;27(10):1003–10. Doi: 10.1016/j.dental.2011.06.007
Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci. 1997;105(2):97–116. Doi: 10.1111/j.1600-0722.1997.tb00188.x
Caixeta RV, Guiraldo RD, Kaneshima EN, Barbosa AS, Picolotto CP, Lima AE de S, et al. Push-out bond strength of restorations with bulk-fill, flow, and conventional resin composites. ScientificWorld Journal. 2015;2015:452976. doi: 10.1155/2015/452976
Seminario-Amez M, Lopez-Lopez J, Estrugo-Devesa A, Ayuso-Montero R, Jané-Salas E. Probiotics and oral health: a systematic review. Med Oral Patol Oral Cir Bucal. 2017;22(3):e282–8. Doi: 10.4317/medoral.21494
Al-Saud LM, Alolyet LM, Alenezi DS. The effects of selected mouthwashes on the surface microhardness of a single-shade universal resin composite: in vitro study. Journal of Advanced Oral Research. 2022;13(2):234-44. Doi: 10.1177/23202068221129020
Alhallak E, Kouchaje C, Hasan A, Makieh R. Evaluation of the effectiveness of probiotic mouthwashes in reducing dental plaque in primary and permanent teeth: a randomized clinical trial. Cureus. 2022;14(8):e28125. Doi: 10.7759/cureus.28125
Abdelnabi A, Hamza NK, El-Borady OM, Hamdy TM. Effect of different formulations and application methods of coral calcium on its remineralization ability on carious enamel. Open Access Macedonian Journal of Medical Sciences. 2020;8(D):94–9. Doi: 10.3889/oamjms.2020.4689
Khosravi M, Esmaeili B, Nikzad F, Khafri S. Color stability of nanofilled and microhybrid resin-based composites following exposure to chlorhexidine mouthrinses: an in vitro study. J Dent (Tehran). 2016;13(2):116–25. Available from: http:// https://pmc.ncbi.nlm.nih.gov/articles/PMC5139929/
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Gloria Fortuna, Bintoro Kardinoto, Sari S. Pandita
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
COPYRIGHT
Authors who publish with this journal agree to the following terms:
Authors hold their copyright and grant this journal the privilege of first publication, with the work simultaneously licensed under a Creative Commons Attribution License that permits others to impart the work with an acknowledgment of the work's origin and initial publication by this journal.
Authors can enter into separate or additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (for example, post it to an institutional repository or publish it in a book), with an acknowledgment of its underlying publication in this journal.
Authors are permitted and encouraged to post their work online (for example, in institutional repositories or on their website) as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
