Proses Pengadaan Jasa Konsultansi Penyusunan Masterplan Pariwisata Melalui Mekanisme Seleksi Ulang
Keywords:
government procurement, consultancy services, tourism masterplan, qualification requirements, North Minahasa RegencyAbstract
Government procurement of consultancy services plays a strategic role in ensuring the quality of planning documents that support sustainable regional development. The preparation of a Tourism Masterplan requires a competitive and accountable selection process to obtain competent service providers. However, procurement processes do not always proceed smoothly and may experience selection failures, necessitating corrective action in the form of a re‑selection. This study examines the implementation of re‑selection in the procurement of consultancy services for the Tourism Masterplan development in North Minahasa Regency. A case study method was employed, involving analysis of procurement documents, qualification requirements, and the results of both the initial selection and the re‑selection. The findings indicate that the failure of the first selection was due to overly restrictive qualification requirements that were misaligned with the capacity of the provider market. The re‑selection, implemented with proportional adjustments to the requirements and schedule, successfully increased the number of qualified participants without lowering technical standards. This study confirms that re‑selection is an effective procurement engineering strategy to balance technical quality, competition, and risk control in government consultancy service procurement.
References
Akmal, S. (2025). Analysis of government construction tender process failures and mitigation strategies. Eduvest Journal, 5(1), 112–125.
Asmeta, F. (2024). Analysis of factors causing re-tendering in construction services procurement. International Conference Proceedings on Engineering and Public Works, 1(1), 88–97.
Bagian Pengadaan Barang/Jasa Setdakab Minahasa Utara. (2023). Profil UKPBJ Kabupaten Minahasa Utara Tahun 2021–2023. Airmadidi.
Haidir, A., & Maliki, B. I. (2024). Penerapan kebijakan e-purchasing dan dampaknya terhadap eksistensi Pokja Pemilihan dalam pengadaan barang/jasa pemerintah. Jurnal Pengadaan Barang/Jasa, 3(1), 19–28.
Lembaga Kebijakan Pengadaan Barang/Jasa Pemerintah (LKPP). (2021). Peraturan Lembaga LKPP Nomor 12 Tahun 2021 tentang Pedoman Pelaksanaan Pengadaan Barang/Jasa Pemerintah melalui Penyedia. Jakarta.
Lembaga Kebijakan Pengadaan Barang/Jasa Pemerintah (LKPP). (2023). Peraturan Lembaga LKPP Nomor 5 Tahun 2023 tentang Standardisasi Dokumen Pemilihan Penyedia. Jakarta.
Organisation for Economic Co-operation and Development (OECD). (2018). Public Procurement for Innovation: Good Practices and Strategies. Paris: OECD Publishing.
Pemerintah Republik Indonesia. (2014). Undang-Undang Nomor 23 Tahun 2014 tentang Pemerintahan Daerah. Sekretariat Negara, Jakarta.
Pemerintah Republik Indonesia. (2018). Peraturan Presiden Nomor 16 Tahun 2018 tentang Pengadaan Barang/Jasa Pemerintah. Sekretariat Negara, Jakarta.
Pemerintah Republik Indonesia. (2021). Peraturan Presiden Nomor 12 Tahun 2021 tentang Perubahan atas Peraturan Presiden Nomor 16 Tahun 2018 tentang Pengadaan Barang/Jasa Pemerintah. Sekretariat Negara, Jakarta.
Putri, D. R., Ophiyandri, T., & Hidayat, B. (2024). Risk analysis of contractor selection in construction work procurement using failure mode and effect analysis (FMEA). Civil Engineering Journal, 10(2), 694–706. doi: 10.28991/cej-2024-0102-12.
Vaidya, K., Sajeev, A. S. M., & Callender, G. (2006). Critical factors that influence e-procurement implementation success in the public sector. Journal of Public Procurement, 6(1), 70–99. doi: 10.1108/JOPP-06-01-2006-B004.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Ade Irma Anthonie, Theo K. Sendow, Lucia I.R. Lefrandt
This work is licensed under a Creative Commons Attribution 4.0 International License.
HAK CIPTA & LISENSI:
Penulis memegang hak cipta dan memberikan hak publikasi pertama kepada jurnal dengan karya yang secara bersamaan dilisensikan di bawah Atribusi 4.0 Internasional (CC BY 4.0) yang memungkinkan orang lain untuk berbagi — menyalin dan mendistribusikan ulang materi dalam media atau format apa pun — dan mengadaptasi — me-remix, mengubah, dan mengembangkan materi tersebut untuk tujuan apa pun, bahkan secara komersial — dengan pengakuan atas penulis karya tersebut dan publikasi awal di jurnal ini.
