Performance of the Tanikaya TK PJK-2T Corn Shelling Machine with a Kubota RD 65DI-1S Drive Engine in Tanjung Sidupa Village, Pinogaluman District, North Bolaang Mongondow Regency
DOI:
https://doi.org/10.35791/jteta.v16i1.64963Keywords:
Performance of Corn Sheller, Tanikaya Corn Sheller, Kubota EngineAbstract
This study aims to test and analyze the performance of the Tanikaya Model TK PJK-2T corn sheller powered by a Kubota Type RD 65DI-1S engine including 1) the working capacity of the machine 2) fuel consumption, and 3) shelling yield. The research was conducted in Tanjung Sidupa Village, Pinogaluman District, using the experimental method. Data were collected in tabular form and processed descriptively. Data collection was carried out in three replications. research results showed that the working capacity of the corn shelling machine at a rotational speed of 1197 rpm was 1034 kg/hour. The working capacity of the shelling machine at a speed of 938.8 rpm was 937.50 kg/hour, and at a rotational speed of 727.4 rpm, it was 833.33 kg/hour. Fuel consumption at 1197 rpm was 109.3 ml, at 938.8 rpm was 103.3 ml, and at 727.4 rpm was 76.33 ml. The highest average shelling yield was achieved at 1197 rpm (82%), while the lowest was at 727.4 rpm (78.50%).
Keywords: Performance of Corn Sheller; Tanikaya Corn Sheller; Kubota Engine.
References
Firmansyah, I.U., M, Aqil., Y. Sinuseng. 2007. Penanganan Pascapanen Jagung. Teknik Produksi dan Pengembangan. Balai Penelitian Tanaman Serelia: Maros.
Mansyur, A. 2024. Menyusuri Jejak Komoditas Pertanian Bolmut. Dilihat 16 April 2025. <https://distan.bolmutkab.go.id/web/formDetail/3/potensi-wilayah/menyusuri-jejak-komoditas-pertanian-bolmut>.
Panjaitan, N. A. 2013. Pengaruh temperatur bahan bakar dan emisi gas buang pada engine Toyota Seri 4K. Skripsi. Universitas Negeri Padang.
Pauzan, A. 2019. Analisis Uji Kinerja Alat Perontok Jagung (Zea Mays) Mekanis dan Semi Mekanis. Skripsi. Sekolah Tinggi Pertanian Kutai Timur. Sangatta.
Purwanto, B., M, Yani., Suprapto. 2014. Pengaruh Kadar Air terhadap Efisiensi Pemipilan Jagung. Jurnal Ilmu Pertanian Indonesia, 19(1), 27–32.
Purwanto, S. 2016. Perkembangan Produksi dan Kebijakan dalam Peningkatan Produksi Jagung. Direktorat Budidaya Serelia: Jakarta.
Rasyid, A. N., B, Lanya., Tamrin. 2014. Modifikasi Alat Pemipil Jagung Semi Mekanis. Jurnal Teknik Pertanian Lampung. 3(2), 163–172.
Syahputra, A. 2017. Uji Unjuk Kerja Mesin Pemipil dan Penggiling Jagung Dengan Kapasitas 30 Kg/Jam. Skripsi. Fakultas Teknik. Universitas Negeri Medan.
Syaifulloh, A., D, Haryanto., M, Santosa. 2018. Uji Kinerja Mesin Pemipil Jagung Tipe Silinder Pemukul. Jurnal Keteknikan Pertanian. 6(1), 25-30.
Umar, S. 2010. Kajian Alat Pemipil Jagung di Tingkat Petani (Study of Corn-Sheller on Farmer Level). Jurnal Agritech. 23(1), 23-27.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Christanti Lalensang, Ruland A. Rantung, Daniel P. M. Ludong
This work is licensed under a Creative Commons Attribution 4.0 International License.
Journal Template
