Pengaruh Bahan Kemasan Berbeda terhadap Mutu Bandeng Presto dengan Pengemasan Vakum pada Suhu Dingin

Authors

  • Julia Nursafira Program Studi Ilmu Perikanan, Fakultas Pertanian, Universitas Sultan Ageng Tirtayasa
  • Aris Munandar Fakultas Pertanian, Universitas Sultan Ageng Tirtayasa
  • Dini Surilayani Fakultas Pertanian, Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.35800/mthp.9.2.2021.33963

Keywords:

microbiology, packaging, polyethylene, polypropylene, storage.

Abstract

Bandeng Presto is a form of processed fishery products made from milkfish with the addition of salt, spices and through heating and pressure processing. Period the storage for bandeng presto is around 2-5 days. Low sheilf can be caused by high nutrient content, as well as enviromental influences and contamination of microorganism. Purpose of this study was to determine the type of packaging material that is best for the quality of bandeng presto with optimal shelf life. This study used  factorial completely randomized design with 2 factors, namely packaging (polypropylene and polyethylene) with storage time (0.7.14 and 21 Days). The parameters observed in this study were organoleptic, moisture content, ash content, fat content, protein content, and total plate count (TPC).The results of this study indicate that the treatment using the type of polypropylene packaging with the vacuum technique is a treatment with an optimal shelf life of 21 days at cold temperatures and has characteristics value his a moisture content value 61.09%, ash content 4.78%, fat content 6.56%, protein content 34.60%, microbes total 4.21x105colony/gand bandeng presto have the appearance of golden yellow, less fresh odor, bland taste, dense texture, slightly mushy and dried mucus.

References

Achmad, AF, Maflahah I, Rahman A. 2016. Pengaruh Jenis Pengemas dan Lama Penyimpanan terhadap Mutu Produk Nugget Gambus. AGROINTEK, 10(2), 70-75.

Akhmadi, MF, Maulianawati D 2019. Fortifikasi Kalsium dan Fosfor pada Crackers dengan Penambahan Tepung Tulang Ikan Bandeng (Chanoschanos). Jurnal Ilmiah Perikanan dan Kelautan, 11(1), 49-54.

Arizona, R, Suryanto E, Erwanto Y. 2011. Pengaruh Konsentrasi Asap Cair Tempurung Kenari dan Lama Penyimpanan terhadap Kualitas Kimia dan Fisik Daging. Buletin Peternakan, 35(1), 50-56.

BSN [Badan Standardisasi Nasional]. 2006. Cara Uji Kimia Bagian 2. Penentuan Kadar Protein pada produk Perikanan SNI-01-2354.4.2006. Badan Standardisasi Nasional. Jakarta: 1-7.

BSN [Badan Standardisasi Nasional]. 2006. Cara Uji Kimia-bagian 3. Penentuan Kadar Lemak pada produk Perikanan SNI-01-2354.3.2006. Badan Standardisasi Nasional. Jakarta: 1-7.

BSN [Badan Standardisasi Nasional]. 2006. Cara Uji Mikrobiologi-bagian 3. Penentuan Angka Lempeng Total (ALT) pada produk Perikanan SNI-01-2332.3.2006: 1-11.

BSN [Badan Standardisasi Nasional]. 2010. Cara Uji Kimia-Bagian 1. Penentuan Kadar Abu dan Abu Tak Larut dalam Asam pada produk Perikanan SNI-01-2354.1.2006: 1-5.

BSN [Badan Standardisasi Nasional]. 2015. Cara Uji Kimia-bagian 2. Pengujian Kadar Air pada produk Perikanan SNI 01-2354.2.2015. Badan Standardisasi Nasional. Jakarta: 1-4.

Hartono, NAD, Sutrisno, Darmawati E. 2018. Pengemasan untuk Mengurangi Resiko Cemaran Timbal (Pb) dan Penurunan Mutu pada Sistem Penjualan Buah Pedagang Kaki Lima. Jurnal Penelitian Pasca panen Pertanian. 15(1): 52-62.

Irawati, AA., Ma’ruf WF, Anggo AD. 2016. Pengaruh Lama Pemasakan Ikan Bandeng Duri Lunak Goreng terhadap Kandungan Lisin dan Protein Terlarut. Jurnal Pengolahan dan Bioteknologi Hasil Perikanan, 5(1), 106-111.

Jinadasa, BKKK. 2014. Determination of Quality of Marine Fishes Based on Total Volatile Base Nitrogen Test (TVB-N). Nature and Science, 12(5), 106-111.

Kasmadiharja, H. 2008. Kajian Penyimpanan Sosis, Nugget Ayam dan Daging Ayam Berbumbu dalam Kemasan Polipropilen Rigid. Skripsi. Bogor: Fakultas Teknologi Pertanian. Institut Pertanian Bogor. 110 hlm.

Manurung, LD dan Erpiani S. 2018. Pengaruh Penggunaan Kemasan yang Berbeda terhadap Mutu Produk Clam Finger Kerang Lentera (Clam Finger). Prosiding Seminar Nasional Multi disiplin Ilmu Universitas Asahan [06 November 2018]: 147-154.

Muflihati, I, Affandi, A R, Wulandari, D. 2020. Perbaikan Sistem Pengolahan dan Pengemasan untuk Meningkatkan Kualitas Bandeng Presto. Amal Ilmiah: Jurnal Pengabdian Kepada Masyarakat, 1(2), 68-73.

Mulyawan IB, Handayani BR, Dipokusumo B, Werdiningsih W, Siska AI. 2019. Pengaruh Teknik Pengemasan dan Jenis Kemasan terhadap Mutu dan Daya Simpan Ikan Pindang Bumbu Kuning. Jurnal Pengolahan Hasil Perikanan Indonesia, 22(3), 464-475.

Nento, W.R & Ibrahim, P.S. 2017. Analisa Kualitas Nugget Ikan Tuna (Thunnus sp.) selama Penyimpanan Beku. Jurnal of Agritech Science, 1(2), 75-81.

Nur, M. 2009. Pengaruh Cara Pengemasan, Jenis Bahan Pengemas dan Lama Penyimpanan terhadap Sifat Kimia, Mikrobiologi dan Organoleptik Sate Bandeng (Chanoschanos). Jurnal Teknologi dan Industri Hasil Pertanian, 14 (1), 1-11.

Purnamayati, L, Wijayanti I, Anggo AD, Amalia U, Sumardianto. 2018. Pengaruh Pengemasan Vakum terhadap Kualitas Bandeng Presto selama Penyimpanan. Jurnal Teknologi Hasil Perairan, 11(2), 63-68.

Susanto, E. 2010. Pengolahan Bandeng (Chanos chanos Forsk) Duri Lunak. Disampaikan pada Program Penyuluhan bagi Masyarakat Pesisir pada tanggal 27-28 Juli 2010. Kabupaten Batang. 1-19.

Syarief, R, Sassya S, Isyana S. 1989. Teknologi Pengemasan Pangan. Laboratorium Rekayasa Proses Pangan, Pusat Antar Universitas Pangan dan Gizi Institut Pertanian Bogor. Bogor. hal. 604 hlm.

Winarno, FG. 1992. Kimia Pangan dan Gizi. Gramedia Pustaka Utama. Jakarta: 92 hlm.

Downloads

Published

06/25/2021

How to Cite

Nursafira, J., Munandar, A., & Surilayani, D. (2021). Pengaruh Bahan Kemasan Berbeda terhadap Mutu Bandeng Presto dengan Pengemasan Vakum pada Suhu Dingin. Media Teknologi Hasil Perikanan, 9(2), 59–68. https://doi.org/10.35800/mthp.9.2.2021.33963

Issue

Vol. 9 No. 2 (2021)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).